Objective
This procedure describes how to manually close shifts and the day end on EvoPOS, when the automatic day end did not happen. The Day End has only one condition: all shifts must be closed on every POS at the station. First handle the suspended sales, then close the shifts, then start the manual day end from a single POS.
Prerequisites
- Have access to every POS still open at the station
- Know the manager code in case the "Annuler tout" (Void All) action asks for it
- Get the manager's approval before settling a Drive Off
Procedure
Note: labels are given in French (English). If the register's translation differs, rely on the button's position and the English label.
Step 1: Open the suspended sales screen
Suspended sales must be cleared out before closing. If the option is configured, the day end shows a warning as long as any remain.
- Go to Menu › Ventes (Sales) › Ventes suspendues (Resume Sale).
- Tap a line in the suspended sales list to highlight it.
- Check the detail shown on the left to see if the sale includes a fuel line.
Note: the ▲ ▼ arrows scroll the suspended sales list. The green round button resumes the highlighted sale (it goes back to being a sale to charge); the red square button exits the screen without resuming anything.
Step 2: Cancel a shop-only sale
A suspended sale that does not include fuel can be canceled directly.
- Highlight the sale, then press the green round button to resume it.
- Charge nothing and press "Annuler tout" (Void All).
- Answer "Non" (No) to the prompt about putting it back in suspended sales, to cancel the sale for good.
- Repeat for each shop-only sale in the list.
Note: read the message carefully before answering. Answering "Non" cancels the sale for good, which is the right choice to close out. Answering "Oui" (Yes) puts the sale back in suspended sales; it will have to be redone.
Step 3: Settle a sale with fuel
Warning: a suspended sale that includes fuel cannot be canceled. It must be settled.
- Highlight the sale with fuel, then press the green round button to resume it.
- Settle the fuel based on the sale's content.
Sale content Action after resuming it Fuel only Autres paiements (Other Payments) › Départ sans payer (Drive Off) Shop + fuel Remove the items with the – key, then settle the fuel as a Drive Off - Note the Drive Off on the receipt, with the manager's approval.
Warning: the Drive Off is the manager's call, not the technician's. It shows up in the Drive Off report. Ask for approval and note it on the receipt.
Warning: do not use "Pas de moyen de paiement" (NMOP) to close out: it puts the sale back on hold instead of settling it.
Step 4: Close the shift on each POS
Close the shift on every POS still open. A single forgotten shift blocks the day end.
- Go to Menu › Fonctions (Functions) › Fermer le quart (Close Shift).
- Enter the bordereau (canister) reference, or the operator's initials if there is none, then confirm with "Entrée" (Enter).
- Enter the cash amount counted by the station, or go through "Billets et pièces" (Notes & Coins), then confirm with "Entrée" (Enter).
- Check that the shift report prints and that the POS returns to the login screen.
Note: confirming "Entrée" alone declares €0. The register flags an amount lower than expected: answer "Oui" (Yes) to continue, "Non" (No) to re-enter it. Do not confirm €0 without the station's approval, the report would show a shortfall.
Note: a pending card pre-authorization (green pump at 0) blocks closing the shift; it must be settled first.
Note: the last shift of the day cannot be a déclaration différée (Deferred Shift), and only one deferred shift is allowed per POS. A pending deferred shift is declared by scanning the bordereau or with the "Déclaration de caisse" (Cash Declaration) button.
Note: if closing happens within the day end time window (often 10 p.m. – midnight), the register directly offers the day end; answer "Oui" only on the last POS closed.
Step 5: Start the manual day end
Once every shift is closed, the day end is started from a single POS, any one of them.
- Log in on a POS.
- Go to Menu › Fonctions (Functions) › Fin de journée manuelle (Manual Day End).
- Let the process query the payment terminals, the pump controller, and the dispensers, without interrupting anything.
- Check that the day end report prints and that the POS returns to the login screen.
Warning: do not interrupt anything. Do not shut down the pumps or the controller before it returns to the login screen.
Note: if the "contrôleur hors ligne" (DOMS / site controller offline) message appears, answer according to the following table.
| Message | Answer | Why |
|---|---|---|
| 1st message | Non (No) | Moves to the 2nd message. An "Oui" retries, and on the 3rd attempt closing continues without that lane. |
| 2nd message | Non (No) | The day end is aborted. A single "Oui" here finishes closing with no fuel data at all sent to the back office. |
Bring the controller back online, then restart the day end.
Warning: if the "ventes suspendues" (suspended sales) warning appears, answer "Non" (No) to cancel the day end and go back to step 1. Answering "Oui" (Yes) continues closing while leaving the suspended sales as is.
Note: a lost report can be reprinted from Menu › Rapports (Reports) › Réimpression fin de journée (Reprint Day End Report).
Step 6: Check the result
- Check that the day end report came out and that the POS is at the login screen.
- Check that the day shows as closed in the back office and that the red "dernière fin de journée ≥ 24 h" (last day end ≥ 24 h) alert is gone.
- Check that no suspended sales remain in the back-office alerts.
- Check that there is no alert for prépaiements non remboursés (Outstanding Prepayments).
- Check that any Drive Off is noted on the receipt, with the manager's approval.